Filament
PLA
PolySonic™ PLA
(General high speed) Ankermake_M5_Ankermake
(Extreme high speed 300mm_s 2g) Bambu_X1Carbon_BambuStudio
(General high speed) Bambu_X1Carbon_BambuStudio
(Extreme high speed 300mm_s 2g) Raise 3D_Pro 3_IdeaMaker
(General high speed) Raise 3D_Pro 3_IdeaMaker
(General high speed) Creality_K1_Creality Print
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolySonic™ PLA Pro
(General high speed) Ankermake_M5_Ankermake
(Extreme high speed 300mm_s 2g) Bambu_X1Carbon_BambuStudio
(General high speed) Bambu_X1Carbon_BambuStudio
(Extreme high speed 300mm_s 2g) Raise 3D_Pro 3_IdeaMaker
(General high speed) Raise 3D_Pro 3_IdeaMaker
(General high speed) Creality_K1_Creality Print
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyTerra™ PLA+
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyLite™ PLA
Raise3D_Pro2_IdeaMaker
Lultbot_Mini_AEROstruder_Cura
Ultimaker_3_Cura
Ultimaker_S5_Cura
FlashForge_Creator_Pro_Simplify_3D
Lultbot_TAZ6_Single_Simplify_3D
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyLite™ PLA Pro
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyLite™ CosPLA
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyMax™ PLA
PolyMax_PLA_Lultbot_Mini_AEROstruder_Cura
PolyMax_PLA_Lultbot_TAZ6_Single_Simplify_3D
PolyMax_PLA_Raise3D_N2_IdeaMaker
PolyMax_PLA_Raise3D_Pro2_IdeaMaker
PolyMax_PLA_Ultimaker_3_Cura
PolyMax_PLA_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyWood™
PolyWood_Raise3D_N2_IdeaMaker
PolyWood_Raise3D_Pro2_IdeaMaker
PolyWood_Ultimaker_3_Cura
PolyWood_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PETG
PolyLite™ PETG
PolyLite_PETG_Lultbot_Mini_AEROstruder_Cura
PolyLite_PETG_Lultbot_TAZ6_Single_Simplify_3D
PolyLite_PETG_Raise3D_N2_IdeaMaker
PolyLite_PETG_Raise3D_Pro2_IdeaMaker
PolyLite_PETG_Ultimaker_3_Cura
PolyLite_PETG_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyMax™ PETG
PolyMax_PETG_Lultbot_Mini_AEROstruder_Cura
PolyMax_PETG_Lultbot_TAZ6_Single_Simplify_3D
PolyMax_PETG_Raise3D_N2_IdeaMaker
PolyMax_PETG_Raise3D_Pro2_IdeaMaker
PolyMax_PETG_Ultimaker_3_Cura
PolyMax_PETG_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
ABS/ ASA
PolyLite™ ABS
PolyLite_ABS_Lultbot_TAZ6_Single_Simplify_3D
PolyLite_ABS_Raise3D_N2_IdeaMaker
PolyLite_ABS_Raise3D_Pro2_IdeaMaker
PolyLite_ABS_Ultimaker_3_Cura
PolyLite_ABS_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyLite™ ASA
PolyLite_ASA_Lultbot_TAZ6_Single_Simplify_3D
PolyLite_ASA_Raise3D_N2_IdeaMaker
PolyLite_ASA_Raise3D_Pro2_IdeaMaker
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PC
PolyLite™ PC
PolyLite_PC_Lultbot_Mini_AEROstruder_Cura
PolyLite_PC_Lultbot_TAZ6_Single_Simplify_3D
PolyLite_PC_Raise3D_N2_IdeaMaker
PolyLite_PC_Raise3D_Pro2_IdeaMaker
PolyLite_PC_Ultimaker_3_Cura
PolyLite_PC_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyMax™ PC
PolyMax_PC_Lultbot_Mini_AEROstruder_Cura
PolyMax_PC_Lultbot_TAZ6_Single_Simplify_3D
PolyMax_PC_Raise3D_N2_IdeaMaker
PolyMax_PC_Raise3D_Pro2_IdeaMaker
PolyMax_PC_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyMax™ PC-FR
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
Polymaker PC-ABS
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
Polymaker PC-PBT
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PA
PolyMide™ CoPA
PolyMide_CoPA_Raise3D_N2_IdeaMaker
PolyMide_CoPA_Raise3D_Pro2_IdeaMaker
PolyMide_CoPA_Ultimaker_3_Cura
PolyMide_CoPA_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyMide™ PA6-CF
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyMide™ PA6-GF
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
TPU
PolyFlex™ TPU95
PolyFlex_TPU95_FlashForge_Creator_Pro_Simplify_3D
PolyFlex_TPU95_Lultbot_Mini_AEROstruder_Cura
PolyFlex_TPU95_Raise3D_N2_IdeaMaker
PolyFlex_TPU95_Ultimaker_3_Cura
PolyFlex_TPU95_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PVB
PolySmooth™
PolySmooth_Lultbot_Mini_AEROstruder_Cura
PolySmooth_Lultbot_TAZ6_Single_Simplify_3D
PolySmooth_Raise3D_N2_IdeaMaker
PolySmooth_Raise3D_Pro2_IdeaMaker
PolySmooth_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyCast™
PolyCast_Lultbot_TAZ6_Single_Simplify_3D
PolyCast_Raise3D_N2_IdeaMaker
PolyCast_Ultimaker_S5_Cura
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
Support
PolyDissolve™ S1
PolyDissolve_S1_With_PolyMide_CoPA_FlashForge_Creator_Pro_Simplify_3D
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolySupport™
PolySupport_With_PLA_Raise3D_Pro2_IdeaMaker
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
PolyCore™
PolyCore™ PC-7414
PolyCore™ PETG-1211
PolyCore™ PVB-1500
