PolySupport™ for PA12 is a break away support specifically engineered for PA12 based filaments. It has a perfect interface with long-chain nylons, strong enough to support it and easily removable by hand. PolySupport™ for PA12 prints at a similar temperature to PA12 and is compatible with open, enclosed and heated chambers. The filament is colored green so its easy to see and remove after printing.
Dry Settings Notes:
(Only if the material has absorbed moisture)
DISCLAIMER:
The created printing profiles are intended for reference only. They should not be used for design specifications or quality control purposes.
End-use performance of printed parts depends not only on materials and printing conditions but also on part design, environmental conditions, etc. Printing profiles are subject to change without notice. Each user is responsible for determining the safety, lawfulness, and technical suitability of recommended printing profiles for the intended application. Polymaker makes no warranty of any kind unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced by the use of recommended printing profiles in any application.
No SKUs found!
Specialty Series
Please fill in the form below or if you have other questions are not included in the form, please contact us through [email protected]. We will get back to you soon.
Please fill in the form below or if you have other questions are not included in the form, please contact us through [email protected]. We will get back to you soon.
