Polymaker G-Flex PETG

easy to print, hard to break.

Print intricate parts that withstand drops, bending and repeated use.

No Break in XY and Z (ISO 179-1)
Articulated T-rex, action figure, chameleon and jeep printed in G-Flex PETG

Your first G-Flex print

1

Pick your preset.

Choose your printer and slicer on presets.polymaker.com.

2

Print straight from the bag.

Every spool is dried and vacuum-sealed at the factory. Use a PEI plate; no glue needed.

3

Keep it dry.

Reseal the spool with the desiccant after printing. Dry it if you see stringing.

G-Flex presets
presets.polymaker.com
Get the G-Flex presets

Print settings

Starting settings

Nozzle230-240 °C
Bed70 °C, PEI, no glue
Print speedUp to 300 mm/s
Volumetric flowUp to 24 mm³/s
SupportsG-Flex PETG or PLA
Diameter / spool1.75 mm / 1 kg

Starting profiles

No G-Flex preset for your printer yet? Start from a profile such as:

Bambu LabBambu PLA Silk
ElegooElegoo PLA Silk
CrealityGeneric PLA
SnapmakerGeneric PLA
PrusaGeneric PLA Silk
AnycubicAnycubic PLA-CF

Keep it dry

Dried and vacuum-sealed at the factory. If you see stringing, dry it:

PolyDryerLevel 3, 24 hOr dry 4 h, then print while drying
AMS 2 Pro65 °C, 24 hOr dry 6 h, then hold 50 °C while printing
Oven70 °C, at least 6 hOr dry 3 h, then PolyDryer Level 3 while printing
Compatible with multimaterial systems, such as Bambu AMS, AMS 2 Pro and Creality CFS.

Why G-Flex PETG?

G-Flex PETG combines PETG's printing ease with TPU's elasticity and impact absorption. Make detailed parts for repeated handling, assembly and everyday use.

Impact resistance.

Elasticity and impact absorption help prints withstand drops, bending and repeated handling.

Easy to print.

Keep fine detail, defined shapes and moving joints with PETG-like printing ease.

Low VOC emissions

TÜV Rheinland (Germany) certified for Low VOC Emission.

Toy safety

Meets the EN 71-3 toy-safety standard for migration of certain elements.

Very few sharp fragments

Unlikely to produce sharp fragments when handling parts or removing supports.

NO BREAK
XY + Z

ISO 179-1 unnotched Charpy impact test: all tested specimens recorded No Break in both XY and Z.

Where G-Flex excels

PropertyPETGG-FlexTPU
Shape retention
Flexibility
Impact resistance
Fine details
Ease of printing

Made for the things you use.

Articulated triceratops skeleton printed in G-Flex PETG White

Articulated models

Print detailed models your children can move, pose and play with.

Telescopic katana printed in G-Flex PETG Black

Props & cosplay

Take your printed props from one event to the next.

Snap-fit boxes printed in G-Flex PETG

Snap-fit toys

Build, take apart and build again.

Baseball printed in G-Flex PETG

Parts that bounce back

Print your own baseball, then give it a bounce.

Action figure
Articulated T-rex
Articulated crocodile
Boomerang
Articulated chameleon
Infinity loop
Articulated dinosaur
Battery box with snap lid
Toy jeep
Four-blade boomerang

Technical documents

PDF

Technical data sheet (TDS)

PDF · English 5.8 MB · Chinese 964 KB
PDF

Safety data sheet (SDS)

PDF · English 42 KB · Chinese 822 KB

FAQ

What is G-Flex PETG?
An elastic, PETG-based filament made from a PETG/TPU blend. It prints like PETG and gives parts the elasticity and impact absorption to withstand drops, bending and repeated handling.
How is it different from PETG and TPU?
Compared with PETG, it adds elasticity and impact absorption. Compared with TPU, it feeds like a rigid filament, keeps its shape and holds fine detail, so articulated and snap-fit parts print reliably.
Which profile should I use?
Use the G-Flex preset for your printer on presets.polymaker.com. If there is none yet, start from a profile such as Bambu PLA Silk (Bambu Lab), Elegoo PLA Silk (Elegoo), Generic PLA (Creality and Snapmaker), Generic PLA Silk (Prusa) or Anycubic PLA-CF (Anycubic). A profile name only describes slicer settings; the filament stays the same.
What print settings do you recommend?
Nozzle 230-240 °C, bed 70 °C on a PEI plate without glue, print speed up to 300 mm/s and volumetric flow up to 24 mm³/s. For supports, use G-Flex PETG or PLA.
Do I need to dry it?
Not at first. Every spool is dried and vacuum-sealed at the factory, so you can print straight from the bag. Reseal it with the desiccant after use. If you see stringing, dry it: PolyDryer Level 3 for 24 h, AMS 2 Pro at 65 °C for 24 h, or an oven at 70 °C for at least 6 h.
Does it work in a multimaterial system?
Yes. It is compatible with multimaterial systems such as Bambu AMS, AMS 2 Pro and Creality CFS.
Will my prints never break?
G-Flex is built to take impact: all tested specimens recorded No Break in XY and Z unnotched Charpy impact testing (ISO 179-1). How a finished part holds up still depends on its design, wall thickness, print orientation and settings.
What safety testing has G-Flex passed?
Printing is VOC-certified for low emissions, and the filament is compliant with EN 71-3 for migration of certain elements.

Still stuck?

Send us a photo of the print and the spool.

Bright Colours

Available now
G-Flex PETG Black spoolBlack
G-Flex PETG White spoolWhite
G-Flex PETG Grey spoolGrey
G-Flex PETG Red spoolRed
G-Flex PETG Yellow spoolYellow
G-Flex PETG Blue spoolBlue
Available later
G-Flex PETG Green spoolGreen
G-Flex PETG Orange spoolOrange
G-Flex PETG Tan spoolTan
G-Flex PETG Brown spoolBrown

Hello Polymaker

Choose your region:

North America

Please fill in the form below or if you have other questions are not included in the form, please contact us through [email protected]. We will get back to you soon.

Europe

Please fill in the form below or if you have other questions are not included in the form, please contact us through [email protected]. We will get back to you soon.

Rest of the World

Please fill in the form below or if you have other questions are not included in the form, please contact us through [email protected]. We will get back to you soon.